Professional Choice Sheds and Garages

  • $6,765.00


CCS security logo Car Covers and Shelter

Sheds Garages Workshops and Industrial Buildings

·         Garage or workshop

·         warehouse

·         industrial building - small to medium industrial applications. 

·         farm shed,  

·         Covered Outdoor Learning Area, (COLA)

·         storage shed

Summary - Simply the best in Australia

  • Genuine Australian Colorbond Cladding
  • Certified Australian G450 High Tensile Steel Columns & Rafters
  • Certified Australian G450-550 High Tensile Steel Purlins & Girts
  • Comprehensive & User-friendly Instructions
  • Certified by Independent Reputable Structural Engineers

Best Price and strongest sheds, garages and industrial buildings available at budget prices  –   Australian made and all strong enough for mazanines cladding or solar panels!

Custom made for you in any size and any wind region

Special features make this the best steel installations in Australia

The Professional Choice differences

Slab Size: If you order a 6000 x 9000, the shed will be built to that slab size.  The steel frame and cladding extend past and over the slab for waterproofing.

Roller Doors – The doors are defined by the size by the actual clearance of the opening with the roller door completely open and its drum at its maximum diameter.  With nearly all others shed manufacturers you will ‘loose’ around 300mm clearance with a door drum under-hang.

Your parts Schedule is an intelligent Bill of Materials designed to be read alongside the engineering Designs, so that you or the installers have the parts as you need them.  You will see that the designs set a new benchmark in the industry.  All designs satisfy both the Australian Standards and the Manufacturer's Specifications.

Your shed connection detail secures the purlin to the rafter using a high tensile M12 bolt, two 38 x 38 x 3 mm square washers and 6 Tek screws for lapped members.  

The structural integrity of this connection is obvious. 

Shed connection detail Professional Choice - strongest in Australia

Your engineering detail is exceptionally clear; but if you have a problem, scan the QR Code in the top right of each page to review a video on your phone! A quick click on the GD4.1 heading will return you to your page.

Professional Choice sheds and garages 

Designed to be lined (lining not included in price) and can be engineered, at little or no extra cost, to have the strength to retrofit solar panels on the roof. Most sheds and garages available in Australia aren't structurally sound enough to support any additional weight.  

“Solar Ready” allows for an addition dead load of 20 kg/m2 on top of the structure allowing the necessary strength to install solar panels. 

Professional Choice Sheds and Garages

Everything is customisable to the millimeter.  You can use all Colorbond colours, add translucent or transparent roof sheets, PA Doors, Windows, Whirlybirds, Insulation, etc.

It’s an installer's dream.  Instantly accessible, clear, comprehensive instructions.

Don’t be fooled by inferior imports assembled in Australia

What to look for to ensure your shed is to Australian standard and Colorbond chart

Indicative Prices and mass details  Professional Choice Sheds

Below is an example first page proposal for a 6000 x 9000 x 2700 Triple door shed/garage with window and prices.

6000x9000 triple garage first page proposal - Professional Choice sheds and garages

 

Free delivery to most of Australia

Wind region           Price                            Approx Mass

Region A           $9100 + GST                          1,539.1 kg

Region B.          $9380 +GST                           1,631.5 kg

Region C.          $9995 +GST                           1,878.3 kg

 

Below is an example first page proposal for a 4000 x 6000 x 2700 single door shed/garage with two window and Personal Access door

4x6x2.7 single garage proposal first page - Professional Choice Sheds Garages and Carports

 

Wind region        Price                  Approx. Mass

Region A           $6765 + GST             1,031.2 kg

Region B.           $6999 +GST              1,100 kg

Region C.           $8269 +GST             1,320 Kg

 

Other Sheds may be ‘Australian made” or maybe just “Australian assembled” but NOT with Australian steel!

Developing a solar ready carports and sheds has cast doubt on many steel structures being sold and installed in Australia. Investing in a carport or shed you should know you're getting a quality steel building.

Professional Choice Can be up to 40% heavier than similar structures in Australia

Professional Choice design and use of steel is as efficient as it can possibly be and yet these structures are heavier than all on the market – Why?

Specifications for Lysaght Trimdek - Car Covers and Shelter Professional Choice Sheds and Garages

Most sheds or garages have TRIMDEC or CUSTOM ORB sheeting attaching (or Chinese import equivalent) to 75mm or less BMT (Base Metal Thickness) and yet the manufacturer specification is a minimum of 1mm BMT. Unless the framing is very close (400mm-450mm which is unlikely on most structurers), they do not meet manufacturer specification and are therefore do not meet NCC compliance – no matter what the engineering certification says.

There is a big difference in the quality high tensile steel made in Australia and the much cheaper mild steel imported from China, India or Korea used by most shed manufacturers in Australia. Mild steel does not have the strength and is lighter than quality Australian steel*. These are just some points as to why Professional Choice is your guarantee that your new installation will meet all manufacturing and Australian standards.

The unique design and engineering software used, ensures we're able to customise your carport or shed to the millimetre with absolutely no waste and why they contain more steel than almost all competitors. All buildings are engineered site-specific to ensure they will withstand the specific conditions of your site and you have the peace of mind knowing that they will not be rejected by any possible insurance claim!

*(Chinese steel is Q235 or 235 MPa.  It is cheaper because it is weaker.  There is no heat treatment in the manufacturing process.  It does not have the strength of Australian G250 'mild' steel, let alone BlueScope’s high tensile G450-550 products.

The Australian high tensile 'G' rating refers to the steel's strength.  G550 is 550 MPa and applies to members up to and equal to 1.0 mm.  Members with a 1.2 mm gauge are G500 and have a yield of 500 MPa.  Gauges of 1.5+ are G450 or 450 MPa.)

 

Australian wind regions single garage Car Covers and Shelter

 

 


We Also Recommend